3-Spray Handheld Shower HeadUpdated 3 days ago
Below you'll find the installation guide for the 3-Spray Handheld Shower Head, along with an installation video.
Tools & Components:
Included: 3-spray handheld shower head, shut-off valve, 108-inch metal hose, shower head holder, and optional thread tape.
You’ll need: Adjustable wrench and a cloth (to clean the threads).
Installation Steps:
1. Remove Old Shower Head:
- Unscrew your old fixed shower head from the shower arm using an adjustable wrench.
- Clean the shower arm threads with a cloth to remove any debris or old thread tape.
2. Install the Shower Head Holder:
- If desired, apply thread tape to the threads of the shower arm for a tighter seal (optional).
- Attach the shower head holder, ensuring the screened washer is in place. Hand-tighten to secure it.
3. Connect the Shut-Off Valve:
- Take the shut-off valve and hand-tighten it onto the hose. Ensure the pre-installed screened washer is seated properly.
4. Attach the Hose:
- Connect the hose to the bottom of the shower head holder using the rounded conical nut. Make sure the washer is seated properly.
- Tighten the hex nut side onto the holder for a secure fit.
5. Dock the Shower Head:
- Attach the handheld shower head into the holder.
6. Leak Test:
- Turn on the water and check all connections: at the shut-off valve, the hose, the holder, and the shower arm.
- If you notice any leaks, shut off the water and ensure all washers are seated correctly and tighten connections as needed.
You can also view additional videos like How to Videos, Product Demos, and Troubleshooting in our Video Library.
We want to offer as much support as possible when it comes time to install your shower head and shower accessories.
If you still need assistance, our expert design team & plumbing professionals are available to assist you and answer any questions you may have.
Product Questions or Help?
1) Give us a call at (854) 888-9231
2) Send an email to [email protected]