Shower Arm and FlangeUpdated a month ago

Below you'll find the installation guide for the Shower Arm and Flange, along with an installation video.

Installation Guide

Installation Steps:

1. Remove the Existing Shower Head:

   • Detach it to get started.

2. Loosen the Flange:

   • Use a utility knife to cut any silicone or plumber's putty around the flange.

3. Remove the Old Shower Arm:

   • Insert a screwdriver into the hole of the shower arm for leverage.
   • Unthread the shower arm counter-clockwise.

4. Prepare the New Shower Arm:

   • Slide the flange over the new shower arm.

5. Apply Thread Seal Tape:

   • Wrap both ends of the shower arm threads with Teflon tape, applying it counter-clockwise (aim for about 10 turns).

6. Install the New Shower Arm:

   • Guide the shower arm into the wall's hole and start threading it in clockwise with the screwdriver.

7. Tighten and Square the Arm:

   • When it gets tight, give it one last turn to square it up in the shower.

8. Secure the Flange:

   • Slide the flange against the wall and tighten the set screw to secure it.

9. Seal the Edges:

   • Use silicone sealant around the edges for a clean finish.

You can also view additional videos like How to Videos, Product Demos, and Troubleshooting in our Video Library.

We want to offer as much support as possible when it comes time to install your shower head and shower accessories. 

If you still need assistance, our expert design team & plumbing professionals are available to assist you and answer any questions you may have.

Product Questions or Help?

1) Give us a call at (854) 888-9231

2) Send an email to [email protected]