The Shower Head Store logo
The Shower Head Store logo

All articles

Bidet SprayerUpdated a month ago

Below you'll find the installation guide for the Bidet Sprayer, along with an installation video.

Installation Guide


Tools & Components:

  • Included: Bidet sprayer, T-valve adapter, and holder.
  • You’ll need: Towel (for spills), adjustable wrench or pliers with protective cap.

Installation Steps:

  1. Prepare Your Workspace:

    • Place a towel under the toilet supply line to catch any water.
    • Turn off the water supply by closing the valve (turn all the way to the right).
    • Flush the toilet to empty the tank.
  2. Remove Old Supply Line:

    • Disconnect the existing supply line from the toilet fill valve using an adjustable wrench.
    • Ensure the supply line is flexible; replace it if it's damaged.
  3. Install the T-Valve Adapter:

    • Attach the T-valve to the toilet fill valve. Ensure the rubber washer is seated properly to prevent leaks.
    • Hand-tighten and then use your wrench for an extra snug fit.
  4. Reconnect the Supply Line:

    • Connect the supply line to the bottom of the T-valve, hand-tightening first, then securing with a wrench.
  5. Attach the Hose:

    • Unwrap the protective caps from the hose. Attach the hose to the T-valve, ensuring the washer is in place. Hand-tighten, then give it a slight turn with the wrench.
  6. Connect the Sprayer:

    • Attach the sprayer to the hose, ensuring the washer is seated. Hand-tighten—no wrench needed here!
  7. Install the Holder:

    • You can mount the holder on the toilet tank or the wall. If wall-mounting, unscrew the holder from the hook and use the included hardware.
  8. Test for Leaks:

    • Slowly open the water supply valve and check all connections for leaks. If any leaks are present, tighten the connections slightly until the leaks stop.
  9. Using the Sprayer:

    • The sprayer lever should be off when not in use (lever pointing up). Adjust it for use while sitting or before you sit down, if needed.
  10. Adjust Water Pressure:

    • A gentle movement of the lever will give you the desired pressure. Avoid leaving the sprayer on for extended periods to prevent leaks.

You can also view additional videos like How to Videos, Product Demos, and Troubleshooting in our Video Library.


We want to offer as much support as possible when it comes time to install your shower head and shower accessories. 

If you still need assistance, our expert design team & plumbing professionals are available to assist you and answer any questions you may have.

Product Questions or Help?

1) Give us a call at (854) 888-9231

2) Send an email to [email protected] 

Was this article helpful?
Yes
No