Adjustable Shower Arm

Below you'll find the installation guide for the Adjustable Shower Arm, along with an installation video.

Tools & Components:

Included: Adjustable shower arm, hex wrench, and black washer.
You’ll need: Adjustable wrench and a cloth (to clean threads and cover the drain).

Remove Old Shower Head:
- Use an adjustable wrench to unscrew the existing shower head from the shower arm.
- Clean the threads on the shower arm with a cloth to remove any old tape or debris.
Prepare for Installation:
- Ensure the black washer is seated properly in the adjustable shower arm.
- Loosen the locking knobs on the shower arm to allow for adjustments.
Attach the Adjustable Shower Arm:
- Hand-tighten the shower arm onto the shower pipe.
- Use an adjustable wrench for a snug fit, but avoid overtightening.
Secure the Arm:
- Use the hex wrench to tighten the locking screws, preventing the arm from swaying.
- Make sure the screws are tightened enough to hold the arm in place.
Attach the Shower Head:
- Screw the rain shower head onto the adjustable arm, ensuring the washer is in place.
- Hand-tighten and then give it a slight turn with the wrench.
Adjust and Finalize:
- Position the shower head at your desired height and angle by loosening the knobs and adjusting accordingly.
- Ensure there’s no gap between the arm and the head when tightening.
Leak Test:
- Turn on the water and check all connections for leaks.
- If there are leaks, ensure all components are lined up correctly and tighten as necessary.

You can also view additional videos like How to Videos, Product Demos, and Troubleshooting in our Video Library.

We want to offer as much support as possible when it comes time to install your shower head and shower accessories.

If you still need assistance, our expert design team & plumbing professionals are available to assist you and answer any questions you may have.

Product Questions or Help?

1) Give us a call at (854) 888-9231

2) Send an email to [email protected]