1-Spray Handheld Shower HeadUpdated 3 months ago
Below you'll find the installation guide for the 1-Spray Handheld Shower Head, along with an installation video.
Tools & Components:
- Included: Handheld shower head, shower arm holder, 72-inch hose, and thread seal tape.
- You’ll need: Adjustable wrench and a microfiber cloth.
Installation Steps:
1. Remove the Old Shower Head:
- Unscrew the existing shower head from the shower arm.
- Use a microfiber cloth to clean the threads of the shower arm, removing any old tape or debris.
2. Prepare the Threads:
- Wrap thread seal tape around the threads of the shower arm (3 to 5 turns), making sure to wrap it clockwise to avoid unraveling during installation.
3. Attach the Shower Head Holder:
- Ensure the washer is seated correctly in the holder.
- Hand-tighten the holder onto the shower arm, then use an adjustable wrench to secure it firmly.
4. Connect the Hose:
- Attach the hose to the holder, ensuring that the washer is seated at both ends.
- Hand-tighten the hex nut side of the hose to the holder and finish tightening with the adjustable wrench.
5. Attach the Handheld Shower Head:
- Connect the conical nut side of the hose to the handheld shower head.
- Hand-tighten and use the wrench for a snug fit.
6. Dock the Handheld Shower:
- Place the handheld shower head into the holder securely.
You’re all set! Turn on the water and enjoy your upgraded shower experience.
You can also view additional videos like How to Videos, Product Demos, and Troubleshooting in our Video Library.
We want to offer as much support as possible when it comes time to install your shower head and shower accessories.
If you still need assistance, our expert design team & plumbing professionals are available to assist you and answer any questions you may have.
Product Questions or Help?
1) Give us a call at (854) 888-9231
2) Send an email to [email protected]